1530 ATC 4 Axis CNC Router
1530 Rotary Axis CNC router
This 1530 5x10 CNC router machine has an Automatic Tool Changer & a Swing ATC Spindle. Both of these can greatly improve working efficiency. It is good at long-time, heavy-duty, and complex wood carving work. The carousel tool magazine with 8 holders is fixed on the side beam, holding more tool bits, saving more man-power, and electric power.
1. 5x10 CNC router with a carousel tool changer can change tools automatically and is good at heavy-duty woodworking.
2. Italy HSD ATC air cooling spindle has good quality and stable operation.
3. The spindle can swing by 180 degrees, which enables the machine to process three-dimensional objects and molds.
4. Carousel type tool magazine with 8 slots can carry up to 8 knives, and the it can change tools automatically and quickly.
5. This CNC wood router has a table size of 1500 3000mm, holding bigger workpieces than 4x8 CNC router.
6. Heavy-duty frame and gantry makes the machine working more stable;
Note: Table size 5x10 actually is 1524mm * 3048mm, if not specified, 5x10 means the same size of 1500mm*3000mm
|X,Y axis travel||1500x3000mm, option: 1300*2500mm, 2100*3000mm, 2100*4000mm, etc|
|Z axis travel||400mm, option: 500mm, 600mm, 700mm, etc.|
|Spindle type||9kw ATC air cooling spindle, ISO30, ER32|
|The 4th axis||Cycloidal pin wheel precision reducer, with high transmission accuracy and torsional stiffness |
Swing from -90 degree to +90 degree
|Tool magazine||Linear type auto tool changer |
Option: Carousel type auto tool changer
|Tool holder with collet||ISO30, ER32 collet: φ4, φ6, 1/8, 1/2|
|Control system||Taiwan SYNTEC /LNC controller, option: Ncstudio|
|Driving system||1kw Japan YASKAWA AC servo driver and 850w AC servo motor, 4 sets. option: 1kw Taiwan Syntec servo|
|Reducer||Japan SHIMPO reducer|
|Machine structure||Heavy duty body with quenching treatment|
|Work table||Aluminum T-slot & vacuum work table|
|Positioning cylinder||5 pieces (X2,Y3)|
|Linear guide||Taiwan Linear guide|
|Transmission||X, Y axis: Taiwan / Germany Helical Rack and Pinion |
Z axis: Taiwan TBI high precision ball screw
|Lubrication system||1.5L automatic lubrication system|
|Tool calibration||Automatic tool sensor calibration|
|Cables||Germany Igus cables with CE, cUL certificate|
|Compatible software||Artcam, Alphcam, Type 3, Ucancam, Aspire, etc.|
|Command language||G Code & M Code|
|Working air pressure||0.6MPa|
|Working voltage||220V 1PH/3PH 50HZ/60HZ |
380V 3PH 50HZ/ 60HZ
|Vacuum pump|| |
|Dust collect system|| |
|Air compressor||Piston air compressor, screw air compressor|
|Protection device||Light curtain|
|Spindle type||9kw ATC spindle (HSK F63),12kw (ISO30, HSK F63), etc.|
|Rotary device||Industrial-grade support of rotary device, diameter 200mm, 320mm|
Click for details
Click for solution
Click for quotation