Blue Elephant

NcStudio Controller System

Position: Home > User Guide > CNC Controller System > NcStudio Controller System

The knowledge and skills you want are here.

How To Work In DSP A11 Handle Control System
How To Work And Adjust Working Speed In NK105 G3

The steps are as follows. The first part is working. Press menu button ,choose “Local Files” Select the file we need. Then load the file to execute. Press green start button to start working. The second part is adjust working speed. ...
Read more
How To Work In DSP A11 Handle Control System
How To Set The Workpiece Zero Point In NK260 Control System

The steps are as follows. Press “Handle”,then turn the handwheel to adjust position When tool touch surface of workpiece Press “F6”,then press “F5”,for all axes go back to zero Press “Jog”,then press “Z+” ...
Read more
How To Work In DSP A11 Handle Control System
How To Set The Workpiece Zero Point In NK105 G3

The steps are as follows. 1.Press “Z-“,the spindle will  move quickly down to the workpiece 2.When the tool near surface of workpiece,press “Shift”,change jog mode to step mode 3. Press “Z-“,the spindle will  move down...
Read more
How To Work In DSP A11 Handle Control System
How To Set The Workpiece Zero Point In NK105 G2

The steps are as follows. 1.Press “Z-“,the spindle will  move quickly down to the workpiece 2.When the tool near surface of workpiece,press “Shift”,change jog mode to step mode 3. Press “Z-“,the spindle will  move down...
Read more
How To Work In DSP A11 Handle Control System
How To  Set The Position Of Tool Changing In NK260 Control System

The steps are as follows. Press “Handle” Please remember these parameters Press “Parameter”，then press “F2”，press“F5” Choose “4524 X-axis ”，input “026” Choose “4525 Y-axis”，inpu...
Read more
How To Work In DSP A11 Handle Control System
How To Set The Position Of The Tool Calibration In NK260 Control System

The steps are as follows. Press “Handle” Press “Parameter”,then press “F2” Choose “3023”，then press “Enter”,input “408” Choose “3024”,then press “Enter”,input “273&...
Read more
How To Work In DSP A11 Handle Control System
How To Set Pulse Equiv And Machine Stroke In NK105 G3

The steps are as follows. The first part is”Pulse Equiv” Press menu button ,choose “Mfr Param” Choose “Pulse Equiv”“X Axis” is 0.00958,“Y Axis” is 0.00958,“Z Axis” is 0.005 The second ...
Read more
How To Work In DSP A11 Handle Control System
How To Seek System parameter position In NK260 Control System

The steps are as follows. Press “Parameter” If you want change parameter4505, press “F2”Manufacturer,input system password “FYRQ” The video is as follows.

Read more
How To Work In DSP A11 Handle Control System
How To Power On Machine

The steps are as follows. Rotate red emergency stop button Press  green start button The video is as follows.

Read more
How To Work In DSP A11 Handle Control System
How To Power On Machine In NK260 Control System

The steps are as follows. Turn the red emergency button on the right Press the green button Turn the red emergency button on the left The video is as follows.

Read more
How To Work In DSP A11 Handle Control System
How To Moves The Axes By Handwheel In NK260 Control System

The steps are as follows. Press “Handle” Turn the left button of handwheel,for adjusting to the axis you want to  change Turn the right button of handwheel,for adjusting moving speed Turn the button below of handwheel,for moving axis The video ...
Read more
How To Work In DSP A11 Handle Control System
How To Move Axis In NK260 Control System

The steps are as follows. Press “Jog” Press “Y+”、“Y-”、“X+”、“X-”、“Z-”、“Z+”,for move   position Press “5”，for switching high and low speed Press “Y+&rd...
Read more
How To Work In DSP A11 Handle Control System
How To Move Axis In NK105G2

The steps are as follows. Press  “4” and “6” to move axis in X axis Press  “2” and “8” to move axis in Y axis Press  “3” and “9” to move axis in Z axis The video is...
Read more
How To Work In DSP A11 Handle Control System
How To Measure The Length(height) Of Tool In NK105 G3 Handle

The steps are as follows. Press “Shift”+”6″combination key to measure the length of tool Every time we measure the length of disparate tool,we need execute disparate file. For example,we measure the length of tool 2 and tool 3 Press menu butto...
Read more
How To Work In DSP A11 Handle Control System
How To Load And Execute Program In NK260 Control System

The steps are as follows. Press “Program” Choose a file you want,then press “F1” Press “State” Press “Auto”,then press “F1” Press “Start” Turn the handwheel to adjust position Press “...
Read more
Furniture CNC
CNC Router
Laser Machine
Quick Links
Policy : Payment Policy Privacy Policy Refund Policy Shipping Policy Return Policy Guarantee and Warranty
WhatsApp